Mochine o phahameng oa lebone la Lens Mounter HP-V8 o sebetsang ka sekhahla

Tlhaloso e Khutšoanyane:

Mochini o khethiloeng oa Pick le Sebaka sa kopano ea lense ea LED ho tsoa ho moetsi oa boiphihlelo ba lilemo tse 10!


Tlhahisoleseling

Lihlahisoa tsa Lihlahisoa

Tlhaloso:

Mochini o khethiloeng oa Pick le Sebaka sa kopano ea lense ea LED ho tsoa ho moetsi oa boiphihlelo ba lilemo tse 10!

Ho fapana le metjeko e tloaelehileng ea ho beoa e fetotsoeng kopano ea LED, mochini o ikhethileng oa HCT le mechini e hlophiselitsoe merero, e e lumella ho etsa ntho ea eona e le 'ngoe - ho aha liboto tsa LED le liboto tsa mokhanni oa LED - hantle.

Mabone a siling a LED, mabone a likharetene tsa LED, lebone la fan la LED, backlight ea LED, esita le liboto tse nang le sebopeho se sa sebetseng le tsona li ka bokelloa kapele, ka nepo le ka ts'epahalo ho HCT-V8.

 

Litšobotsi:

• Ho nepahala hofeta: Pono hodima Alignment ea Fly ho netefatsa ho nepahala ho phahameng.

• Ka sehokelo sa inline se tsamaellanang se tsamaeang kahare bakeng sa automation ea mola.

• E etselitsoe ka ho khetheha kopano ea lilense tsa LED.

• Terei ea vibrate ea hau ea ho tloaela ho fepa Lens ea LED.

• Hape e ka beha likarolo tsa SMD ho tloha ho 0603 ho ea ho 7474, ho kenyelletsa li-resistors, li-capacitor, li-LED tse nang le matla a mangata, li-LED tse tloaelehileng le tse sa lumellaneng hantle.

• Magnetic levitation linear motor ho X le Y axis bakeng sa ho pheta-pheta le ho tsitsa.

• Ho sebelisa sekala se kenyellelitsoeng ka ho otloloha sa naha hantle, motor, solenoid, cable, jj., Ho ntlafatsa ho nepahala le botsitso.

• Software e iketselitsoeng e nolofalletsa tlhahiso, ho sebetsa habonolo le mananeo.

 

Paramente ea Bohlale:

Mohlala HCT-V8
Tsamaiso Sistimi ea Flying Vision Alignment System
Palo ea Spindles 8 Spindles x 1 Gantry
Lebelo la ho beoa LEBENKELE 18000CPH (Optimum)
Bakeng sa LED 40000CPH (Optimum)
Ho nepahala ha tikoloho ± 0.03mm(E ipapisitse le li-chips tse tloaelehileng)
Karolo ea motsoako Ho tsamaisa pono Bakeng sa lilense tsohle tse akaretsang
Max Height H = 12mm
Bophahamo ba Board (mm) Bonyane 50 (L) x 50 (W)
Boholo 1,200 (L) x 460 (W)
Boko ba PCB 0.5 - 3.0
Mokhoa oa Tsamaiso ea Boto Inline Conveyor
Feeling Lens Letlapa le thathamisitsoeng la Vibration
Mofuta oa Tlatsetso Mofuta oa Phepelo Phepelo ea Motlakase
Bokhoni ba ho fepa 20 (12mm)
Sesebelisoa Matla AC 220V / 240V 50 / 60Hz, Karolo e le 'ngoe
Boholo 3.2KW
Tšebeliso ea Moea 0.55-0.7MPa (5.6-7.1kgf / cm2)
Boima Makasine. 1680kg + 100kg
Bophahamo ba Kantle (mm) 2,000 (L) x 1,400 (D) x 1,400 (H)

 


  • E fetileng:
  • E 'ngoe:

  • Ngola molaetsa oa hau mona 'me u re romelle ho rona